4 in. Performance Wheel XL 1.125 in. Bearing Bore
am-4176
$36.00
The 4 in. Performance Wheel XL is a virtually indestructible wheel made out of solid 6061 aluminum. This competition-proven design has been used on FIRST Robotics Competition robots for many years....Read More
0 reviews
Write a ReviewProduct Overview
The 4 in. Performance Wheel XL is a virtually indestructible wheel made out of solid 6061 aluminum. This competition-proven design has been used on FIRST Robotics Competition robots for many years. This new version of this wheel is 50% wider than our regular 4 in. Performance Wheels for maximum traction. This wheel can take anything an FRC robot can throw at it, and much more.
This wheel is designed to be supported by 1.125 in. OD (FR8) flanged bearings, and driven by motion hardware that utilizes a 1.875 in 6-hole bolt circle found in many AndyMark and competition robotics products. To mount one of these to the rear (flat) side, use a 250 Sprocket and Pulley Spacer. To mount one to the front, use a 550 Sprocket Spacer. This wheel does not include 1.47" wide tread material.
Note: This wheel is designed to utilize rivets to attach the tread to the wheel. AndyMark recommends steel 1/8 in. diameter rivets with a 0.251 in. - 0.312 in. grip range. The wheel has been manufactured with no holes on the rim, as it is intended to be a blank canvas for teams to install rivets freely.
This wheel is designed to be supported by 1.125 in. OD (FR8) flanged bearings, and driven by motion hardware that utilizes a 1.875 in 6-hole bolt circle found in many AndyMark and competition robotics products. To mount one of these to the rear (flat) side, use a 250 Sprocket and Pulley Spacer. To mount one to the front, use a 550 Sprocket Spacer. This wheel does not include 1.47" wide tread material.
Note: This wheel is designed to utilize rivets to attach the tread to the wheel. AndyMark recommends steel 1/8 in. diameter rivets with a 0.251 in. - 0.312 in. grip range. The wheel has been manufactured with no holes on the rim, as it is intended to be a blank canvas for teams to install rivets freely.
Specifications
- Bolt Pattern: 6 hole on a 1.875 in. diameter bolt circle
- Bore: 1.124 in.
- Diameter: 3.7 in.
- Finish: Tumbled
- Hole Pattern: Qty 6 0.159 in. holes on a 1.875 in. bolt circle tapped for 10-32 thread
- Material: 6061-T6 Aluminum
- Weight: 0.374 lbs
- Width: 1.525 in. Lip to Lip
Documents
Layout Print(s)
CAD File(s)
Don't see what you need?
Returns
Returns are accepted within 30 days of purchase.
View our return policy here.
Recommendations
