navX2-Micro Navigation Sensor

This item is restricted for shipment in some countries. Please check international shipping restrictions before ordering.

The navX-2 Micro is the greatest sensor for orientation in competitive robots. navX2-Micro is a second-generation 9-axis inertial/magnetic sensor and motion processor. Designed for plug-n-play installation onto robots such as those used in the FIRST Technology Challenge (FTC) and the FIRST Robotics Challenge (FRC), navX2-Micro helps build better robots by adding sophisticated navigation capabilities. Significant improvements over the classic navX-Micro allow for more accuracy, decreased yaw drift, and faster boot time. navX-2 Micro includes software algorithms for enhanced sensor calibration as well as KalmanFilter-based data fusion combining gyro, accelerometer, and magnetometer data into a 9-axis heading and high-quality magnetometer calibration including magnetic disturbance detection.

In addition to being an Inertial Measurement Unit, navX-Micro capabilities are referred to within the aerospace industry as an “Attitude/Heading Reference System” (AHRS). Kauailabs brings this high-tech AHRS capability to FIRST teams – to use, learn, and explore. navX-Micro is a key component of Kauailabs’ ongoing efforts to make state-of-the-art navigation technologies used in drones and autonomous vehicles (e.g., the Google Car) available to robotics students and enthusiasts as low-cost, open-source products.

Improvements over navX "Classic":
navX2-Micro features a new set of IMU & Magnetometer sensors with superior sensor specifications to those on the MPU-9250 sensor. This board has a faster 180Mhz microcontroller and an optimized startup time at 5 seconds versus 15 seconds. In addition, it has a completely new Kalman Filter-based Sensor Fusion algorithm running internally at a blazing fast 416Hz.

Individual Components in Bundle:

• 1 - navX-2 Micro Navigation Sensor (am-3554a)
• 1 - USB A to Mini B 2.0 Cable 6 Ft Long (am-4015)
• 1 - navX-2 Micro Navigation Sensor Case (am-4025)
• 1 - 4-Pin JST PH to Molex Cable (am-4363)

Features:

• 3-axis Magnetometer,LIS2MDL
• 32-bit ARM processor, ST Micro LSM6DSM IMU
• KalmanFilter-based data fusion

Sophisticated Motion Processing:

• High Accuracy, Low-latency Yaw, Pitch and Roll Angles calculated by real-time Kalman Filter running at 416Mhz
• Factory Accelerometer Calibration, Automatic Gyroscope Calibration
• Quaternions and Gravity-corrected Linear Acceleration and Velocity Measurements
• High-sensitivity Motion Detection
• Tilt-compensated Compass Heading
• 9-Axis absolute heading w/Magnetic disturbance detection

Inertial/Magnetic Measurement Unit:

• Configurable Update Rate from 4 to 200Hz
• Access to Raw Data from Gyroscopes, Accelerometers, and Magnetometers

Easy to Use:

• Plug-n-Play connection on FTC and FRC robots via I2C and USB interfaces
• 5V and 3.3V-compatible I2C Signaling
• Can be powered by either 5V or 3.3VDC
• Connection to Windows PC via USB Cable
• FTC and FRC Software libraries and sample code
• Support for Mounting in horizontal, vertical and even upside-down configurations via Omnimount
• Tools for Magnetometer Calibration

Warranty Information

For Studica/Kauai product warranty replacements or assistance with navX products, please contact Studica via email, support_ca@studica.com