To celebrate our 20th anniversary use code: 20AMSALE on select products now through May 31st, 2024!
Summer Hours: Mon. - Thurs. 8:00 AM - 5:00 PM, CLOSED FRIDAYS through 8/2/24.
To celebrate our 20th anniversary use code: 20AMSALE on select products now through May 31st, 2024!
Summer Hours: Mon. - Thurs. 8:00 AM - 5:00 PM, CLOSED FRIDAYS through 8/2/24.
am-4478
$83.00
This bundle features the basic components to power the RadioLink radio and receiver. The next generation of robot remote control is here. Want features? It has features, so many features, more tha...Read More
The built-in battery of T8S is 1S lithium. When the voltage becomes low, the green indicator will flash with a warning tone. Make sure to charge the battery in time to avoid possible damage by over-discharge. T8S charging is as simple, just plug in the micro USB data cable to a computer or portable charger. It takes approximately 40 minutes to fully charge T8S.
1) Put the transmitter and the receiver close to each other (about 1 foot) and power on the receiver.
2) Switch on the transmitter, and the LED on R8SM will start flashing slowly.
3) There is a black binding button (ID SET) on the side of the receiver. Press the button until the LED is flashing
quickly and release, meaning the binding process is ongoing.
4) When the LED stops flashing and is always on, binding is complete. If not successful, the LED will flash slowly, if this happens, repeat the above steps.
Returns are accepted within 30 days of purchase.
View our return policy here.
I used this set for a classroom battle bots competition. They were very simple to integrate and proved to be very durable.