RadioLink T8S with Mecanum Mixer

The goBILDA Mecanum mixer allows for simple RC-control of a mecanum drive robot. The Mecanum mixer plugs into a standard RC receiver using three input channels. Four motor speed controllers get plugged into the mecanum mixer, then the Mixer takes over and its signal mixing will handle the rest. Are some of your wheels spinning the wrong direction? This mixer features switches to easily reverse the direction of each of the motors individually.

Included Hardware:

• RadioLink T8S Wireless Controller & R8EF Receiver (am-4422)
• Mecanum Mixer (am-5212)

Binding the Transmitter and Receiver: 

1. Put the transmitter and the receiver close to each other (about 1 foot) and power on the receiver.
2. Switch on the transmitter, and the LED on R8EF will start flashing slowly.
   
3. There is a black binding button (ID SET) on the side of the receiver. Press the button until the LED is flashing quickly and release, meaning the binding process is ongoing.
   
4. When the LED stops flashing and is always on, binding is complete. If not successful, the LED will flash slowly, if this happens, repeat the above steps.
   

Wiring:

Three male-to-male servo extensions come included to mate your mixer to your receiver.

Basic wiring diagram for Mecanum Mixer: