Robot Power Cable Kit, custom lengths up to 36 in.

Everyone's Robot is different, this lets you customize the wire gauge, jacket type and lengths of your Robot Side Power Cable designed to connect a Power Distribution Panel mounted on your robot to a battery via a battery cable (6AWG, 6AWG Custom, or 4AWG), It includes a 120A Breaker.(depending on availability it might be am-0282 or am-0282a)

All wire connections are crimped with a 6-ton pneumatic crimping tool to ensure they are never the failure point.

How to Customize:

1. Select your Cable Gauge, Type, and SB Connector
2. Select the overall cable length, which does not included the SB Connector
3. Select the length between the SB Connector and the 120A Breaker on the red wire side
4. The length of the individual red cable will be calculated automatically to make the ring terminal connections the same distance from the APP.

Note: Lengths are +/- 0.5 in.

Competition Tip: Remember, as the cable length increases, so does the internal resistance of the overall system. This creates a voltage drop that means less power going to your motors and control system. For best results, you'll want to keep this cable as short as your design allows safely.