Rover

The Rover Chassis is the newest addition to our AndyMark family of drive bases. The Rover was inspired by our 2019 Launch Bot.  This small yet powerful drive base is perfect for that off-season project you'll be wanting to tackle. Rover is available in two configurations: 8" Pneumatic Wheels or 6" SR Mecanum wheels. Each configuration has been optimized for speed and power and features AndyMark RedLine Motors and 57 Sport Gearboxes. The chassis dimensions are approximately 22 in. x 18 in. x 6 in. but vary slightly depending on the version.

Gear Ratios

Included Items:

The Rover 8" Pneumatic Mechanical Chassis includes the following:

• 4 - 1/2 Inch Hex Hub (am-2568)
• 2 - Battery Strap (am-2940)
• 2 - Rover End Rail (am-4131)
• 2 - S3 Corner Gusset (am-3606)
• 4 - RedLine Motor with 16T Pinion (am-3775a_16t)
• 2 - Rover Drive Rail (am-4094)
• 1 - Rover Bottom Plate (am-4100_bottom)
• 1 - Rover Top Plate (am-4100_top)
• 10 - 1/2 Inch Hex Bearing (am-2986)
• 2 - 3" Sport Shaft (am-3791)
• 2 - 57 Sport Flange Mount (am-4132)
• 2 - 57 Sport 16:1 SD (am-3972_016)
• 4 - 8IN Pneumatic wheel (am-0970)
• 6 - 1/2 Inch Hex Spacer x 0.25 Inch (am-3948-250)
• 4 - 1/2 Inch Hex Spacer x 0.5 Inch (am-3948-500)
• 2 - 1/2 Inch Hex Spacer x 0.188 Inch (am-3948-188)
• 1 - Box of Riveted #25 Chain (am-0370)
• 6 - 17T Double Sprocket for #25 Chain (am-3999)
• 2 - Rover Wheel Shaft (am-4133)
• 2 - 1/2 Inch E Clip (am-0206)
• 2 - Sport 2 Motor Gearbox with Pinion Shaft (am-3985)
• 25 - 10-32 x 2000 SHCS (am-1049)
• 6 - 1/4-20 x 500 BHCS (am-1039)
• 6 - 1/4 Inch Washer (am-1027)
• 2 - Rover Idler Shaft (am-4126)
• 8 - Nylon Spacer 3/4 Inch (am-4107)
• 24 - 1/4-20 x 1.75 Inch Self Tapping Scew (am-1372)
• 40 - 10-32 Nylock Jam Nut (am-1063)
• 4 - #10 Fender Washer (am-1523)
• 8 - 10-32 x 0.625 Inch Socket Head Cap Screw (am-1007)
• 6 - 10-32 x 2.75 Inch Socket Head Cap Screw (am-1397)
• 8 - 10-32 x 1.375 Inch Socket Head Cap Screw (am-1154)
• 6 - 10-32 Wing Nut (am-1483)
• 8 - 3/16 Rivet .376-.5 Range (am-1340)
• 4 - 10-32 x 0.375 Inch Socket Head Cap Screw (am-1359)
• 16 - 0.375 in. OD x 0.257 in. ID x 0.875 in. Aluminum Spacer (am-1513)
• 8 - 10-32 x 0.5 Inch Button Head Cap Screw (am-1512)

The Rover 6" Mecanum Mechanical Chassis includes the following:

• 4 - 1/2 Inch Hex Hub (am-2568)
• 2 - Battery Strap (am-2940)
• 1 - Rover End Rail (am-4131)
• 2 - S3 Corner Gusset (am-3606)
• 4 - RedLine Motor with 16T Pinion (am-3775a_16t)
• 2 - Rover Drive Rail (am-4094)
• 1 - Rover Bottom Plate (am-4100_bottom)
• 1 - Rover Top Plate (am-4100_top)
• 4 - 1/2 Hex Bearing (am-2986)
• 4 - 3" Sport Shaft (am-3791)
• 4 - 57 Sport Flange Mount (am-4132)
• 4 - 57 Sport 64:1 SD (am-3973_064)
• 4 - Sport 775 Mount Plate (am-3765)
• 1 - 6" Mecanum Wheel Set (am-3479)
• 4 - 1/2 Inch Hex Spacer x 1 Inch (am-3948-1000)
• 24 - 10-32 x 0.75 Socket Head Cap Screw (am-1047)
• 8 - Nylon Spacer 3/4 Inch (am-4107)
• 24 - 1/4-20 x 1.75 Inch Self Tapping Scew (am-1372)
• 40 - 10-32 Nylock Jam Nut (am-1063)
• 4 - #10 Fender Washer (am-1523)
• 8 - 10-32 x 0.625 Inch Socket Head Cap Screw (am-1007)
• 6 - 10-32 x 2.75 Inch Socket Head Cap Screw (am-1397)
• 8 - 10-32 x 1.375 Inch Socket Head Cap Screw (am-1154)
• 6 - 10-32 Wing Nut (am-1483)
• 8 - 3/16 Rivet .376-.5 Range (am-1340)
• 4 - 10-32 x 0.375 Inch Socket Head Cap Screw (am-1359)
• 16 - 0.375 in. OD x 0.257 in. ID x 0.875 in. Aluminum Spacer (am-1513)
• 8 - 10-32 x 0.5 Inch Button Head Cap Screw (am-1512)

The Rover With Electronics includes the following:

• 1 - 120A Circuit Breaker (am-0282)
• 2 - Powerpoles 8pk (am-2198)
• 1 - Yellow Spade Connector 10pk (am-2211)
• 1 - Hero Development Board (am-3206)
• 1 - PowerPole Distribution Board (am-3699)
• 4 - Victor SPX (am-3748)
• 1 - CAN connector (am-3827)
• 1 - Rover Chassis Power Cable (am-4113)
• 1 - Hero Power Cable (am-4114)
• 5 - 30 Amp Resetable Fuses (am-4112)
• 1 - Logitech Wireless Controller (am-4049)
• 5' - Red and Black Bonded Wire (am-0904_5)
• 6 - M3 x 14 mm Socket Head Cap Screw (am-1367)
• 6 - M3 nut (am-1023)
• 2 - 10-32 Nylock Jam Nut (am-1063)
• 2 - 10-32 x 0.5 Inch Button Head Cap Screw (am-1512)
• 4 - 6 mm Standoff (ip-3749_standoff)
• 2 - 1/4-20 x 1 Inch Socket Head Cap Screw (am-1341)
• 2 - 1/4-20 Nylock Nut (am-1015)
• 8 - M3 x 10 mm Socket Head Cap Screw (am-1021)
• 4 - M4 x 50 mm Socket Head Cap Screw (am-1401)
• 4 - M4 Nut (am-1435)
• 1 - 120 Ohm Resistor (am-4111)
• 4 - 20 AWG White Ferrule Crimp (am-3738_20)