Peanut Drill Guide

Our Peanut Extrusion (am-3090-6) is named for the peanut-shaped rib in the middle that provides additional strength for attachments. For proper alignment to the connecting piece you want to hit that rib--but we know that's not always easy when the surface is curved. This 3D-printed hole guide will help by clipping onto the peanut extrusion for better alignment. There are three sets of holes and 2 additional handy features. Two set of holes are for drilling a horizontal pair of holes. These holes will either be entirely through the internal "peanut" feature vertically or miss the "peanut" feature and pierce just the center ribs. There is also a pair of vertical holes for drilling either into the extruded holes at a 90 degree angle or for drilling on either side of the "peanut" feature. There is also a slot letting you see the end of the extrusion and lining up the horizontal set of holes with the end as well as a gap to let you clamp the guide in place while you drill.  Parts Included:

• 1 - 3D printed Peanut Extrusion Guide
• 2 - 0.5 in OD 0.25 in Long Steel Press Fit Bushing (am-1511)