Robits 8 in. Turntable Assembly

am-5470

$59.00

The Robits 8 inch Turntable Assembly can add a new spin to your next robot project. This assembly eliminates the difficulty of the past by providing a robust power transmission option with an assor...Read More

View Full Details

Product Overview

The Robits 8 inch Turntable Assembly can add a new spin to your next robot project. This assembly eliminates the difficulty of the past by providing a robust power transmission option with an assortment of easy to use mounting features. This system is designed to natively accept one of our Programmable Servos or NeveRest Gearmotors giving you plenty of flexibility on speed/torque options. Due to the input mounting locations, multiple motors or servos (up to 8!) can be added to increase the load this turntable can move. The turret gear when paired with the included input gear creates a 4 to 1 reduction. When used with one of our 5-turn servos, this gives over a full rotation of travel. The added gear reduction can also be a great way to create a higher ratio for arm joints. Finally, the large hole in the mounting plate is great for allowing components to pass through the center.

**Note** The following components are NOT included with this kit.

Servo Drive Components

  • 1 - Programmable Servo and
  • 1 - 5mm Hex to 375IN Hex Adapter (am-4957) or
  • 1 - 5mm Hex Servo Hub (am-5439)

Motor Drive Components
  • 1 - NeveRest Orbital Motor
  • 1 - 6mm D to 375IN Hex Adapter (am-3444)

Use the above components to add power transmission to the Turntable mechanism. There are examples of power transmission assemblies in the CAD Files at the bottom of this page.

Included Items:

  • 1 - 200T 20DP Turntable Gear (am-5038)
  • 1 - 50T 20DP 375 Hex Bore Gear (am-5020_50)
  • 1 - Bearing for 8 Inch Turntable (am-5039)
  • 1 - Mounting Plate for 8 Inch Turntable (am-5040)
  • 1 - Robits Side Motor Mount (am-5012)
  • 4 - 10-32 x 750 FHCS (am-1170)
  • 4 - 10-32 x 1000 FHCS (am-1324)
  • 7 - 10-32 x 750 SHCS (am-1047)
  • 11 - 10-32 Nylock Nut (am-1063)
  • 3 - #10 Washers (am-1026)
  • 4 - M3-0.5 x 8mm Zinc, Thread Lock Nylon Patch Screw (am-1500)
  • 1 - 0.430 ID x 0.500 OD x 0.500 L Aluminum Spacer (am-1699)

Specifications

  • Length: 10 inches
  • Width: 10 inches
  • Thickness: 1.6 inches
  • Mounting Pattern: #10 holes on a 0.5 inch spacing
  • Gear Ratio: 4:1
  • Load Capacity: 65 pounds

Returns

Returns are accepted within 30 days of purchase.
View our return policy here.

Recommendations

Robits Tubes

$2.23 – $22.00

Robits Core Kit

am-5000

$850.00

Robits Compact Linear Slide

$115.00 – $199.00

Robits Mounting Brackets

$2.00 – $10.00

1 review

  1. star star star star star 5 out of 5 stars

    Awesome product, integrates well with other systems

    We ordered 2 of these turntables to use with servos. They were very quick and easy to assemble, and work well with our Rev and GoBilda u-channel. We’re using the servo to operate, and while it didn’t look like the servo’s center lined up, both turntables work with the servo AND gear attached exactly as instructed. The gear applies a good deal of tension in the recommended placement, and turns the device perfectly in either horizontal or vertical allignment. -FTC 23509

    HC from West Lafayette

    Verified Purchaser

Top of Page