SmoothGrip Wheels

Looking or a flat profile wheel with plenty of grip? Look no further than our six or eight inch SmoothGrip wheels! Many are familiar with our flagship HiGrip wheels which feature an aggressive tread pattern great for biting hard into the ground. SmoothGrip wheels provide a strong level of traction with a longer life-span thanks to their smooth profile. They make great drive wheels on almost any surface as well as great flywheels to propel game pieces at high speed without damage. SmoothGrip wheels feature your favorite 1.125 in. bearing bore and 1.875 in. bolt circle, allowing you to mount a hub or bearing of your choice for live or dead axle setups.

In 2010, the Gray 8 in. 80A Durometer SmoothGrip wheel was provided in the FRC Kit of Parts under the name "FIRST Wheel". No bearings are included.

Usage With Axle and Hub:

• If you wish to drive this wheel with an axle and hub, you can pick your hub by fitting any of the AndyMark hubs to this wheel. Hubs are not included with this wheel. If this is your choice, then no bearing is needed. To install a hub onto this wheel, use #10-24x3/4 thread forming screws.

Usage With Sprockets and Bearings:

• If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel with #10-24x3/4 thread forming screws. You will also need to press ball bearings into the wheel so that it may spin on a shaft or bolt. The ball bearings must have a 1.125 in. od. For a 1/2 in. shafts, use am-0181. For a 3/8 in. shafts use am-0209.