8 in. Plastic Omni-Wheel

Name: 8 in. Plastic Omni-Wheel
Price: 37.00 USD
Availability: InStock

am-0048a

$37.00

8 in. Plastic Omni WheelThis revision has higher quality rubber rollers than the previous version. Usage With Axle and Hub: If you wish to drive this wheel with an axle and hub, you can pick you...Read More

0 reviews

Write a Review

Add to Wish List

View Full Details

Product Overview

8 in. Plastic Omni Wheel
This revision has higher quality rubber rollers than the previous version.

Usage With Axle and Hub:

If you wish to drive this wheel with an axle and hub, you can pick your hub by fitting any of the AndyMark hubs to this wheel. Hubs are not included with this wheel. If this is your choice, then no bearing is needed. To install a hub onto this wheel, use #10 screws and nuts. #10-24x3/4 thread forming screws.

Usage With Sprockets and Bearings:

If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel with #10 screws and nuts. You will also need to press ball bearings into the wheel so that it may spin on a shaft or bolt. The ball bearing must have a 1.125 in. od. For a 1/2 in. shafts, use am-0181. For a 3/8 in. shafts use am-0209.

Included Hardware:

18 - Black SBR Omni Roller (am-0049a)
36 - Omni-Roller Sleeve (am-0050)
2 - 8 in. Omni Wheel Web (am-0079)
18 - M3-0.5 Nylock Nut (am-1023)
18 - 1x1/8 in. Steel Dowel Pin (am-1019)
18 - M3-0.5 x 10 mm Socket Head Cap Screw (am-1021)
3 - M5-0.8 Nylock Nut (am-1022)
3 - M5-0.8 x 20 mm Socket Head Cap Screw (am-1020)

Specifications

Bolt Pattern: 6 hole on a 1.875 in. diameter bolt circle
Bore: 1.125 in. diameter bore, 1/4 in. deep on either side, 0.95 in. diameter thru hole
Diameter: 7.9 in.
Load Capacity: 50 lbs (rollers don't spin past this weight)
Material: Black Polycarbonate, Brass
Roller Axle: Steel Dowel Pin
Roller Durometer: 80A
Rollers: 18
Weight: 1 lbs
Width Across Middle: 0.7 in.